From: Galen Charlton Date: Mon, 24 May 2010 12:35:07 +0000 (-0400) Subject: moved INSTALL.debian-lenny to INSTALL.debian X-Git-Tag: v3.04.00~220^2~33 X-Git-Url: http://koha-dev.rot13.org:8081/gitweb/?a=commitdiff_plain;h=01c783e3f13c28b9d7eec6fc9d00976ecfb9a4b3;p=koha_fer moved INSTALL.debian-lenny to INSTALL.debian The old INSTALL.debian was specific to Etch, which is no longer supported by the Debian project. Lenny is the current Debian stable. Signed-off-by: Galen Charlton --- diff --git a/INSTALL.debian b/INSTALL.debian index 5448d86876..e90942b833 100644 --- a/INSTALL.debian +++ b/INSTALL.debian @@ -1,8 +1,7 @@ ============================= -Installation Guide for Installing Koha on Debian Etch with MySQL 5 +Installation Guide for Installing Koha on Debian Lenny with MySQL 5 ============================= -Copyright (C) 2007, 2008 LibLime (http://liblime.com) Some parts copyright 2010 Chris Nighswonger Feedback/bug reports: Koha Developer's List: @@ -18,112 +17,61 @@ as indicated or by running the command directly as root. 1. Prepare System and Install Dependencies -1.1 Install Debian Etch via Businesscard CD +1.1 Install Debian Lenny via Businesscard CD -See http://www.debian.org/releases/etch/debian-installer/ +See http://www.debian.org/releases/lenny/debian-installer/ -WARNING: use Perl 5.8 (a library Koha depends on, -MARC::File::XML may not work with Perl 5.10, see: -http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=2309), - -1.2 Set up your locale - -Your locale should be set to UTF-8, as should Apache2 and MySQL 5. -This step is VERY IMPORTANT for a UNICODE compliant system. Please -read over the following document carefully: - -http://wiki.koha.org/doku.php?id=encodingscratchpad - -IMPORTANT: You _MUST_ follow all the steps outlined there for - Apache2, MySQL 5, etc. BEFORE you install Koha. - -1.3 Set up apt sources for Git, Yaz and Zebra packages +1.3 Set up Indexdata apt sources for Yaz and Zebra packages Edit your /etc/apt/sources.list file and add the following: # Index Data - deb http://ftp.indexdata.dk/debian etch main - deb-src http://ftp.indexdata.dk/debian etch main - - # Backports - deb http://www.backports.org/debian etch-backports main contrib non-free - -Backports packages are signed with a key you can install as follows: - - $ sudo apt-get update - $ sudo apt-get install debian-backports-keyring + deb http://ftp.indexdata.dk/debian lenny main + deb-src http://ftp.indexdata.dk/debian lenny main The Index Data packages are signed with a key you can install as follows: $ wget http://ftp.indexdata.dk/debian/indexdata.asc $ sudo apt-key add indexdata.asc -Run the following command to update your system: - - $ sudo apt-get update - $ sudo apt-get -t etch-backports install git-core git-email - $ sudo apt-get install yaz idzebra-2.0 idzebra-2.0-doc - 1.4 Get Koha 1.4.1 Option A: Download Koha via Git (optional) + $ sudo apt-get install git-core git-email $ git clone git://git.koha-community.org/pub/scm/koha.git kohaclone $ cd kohaclone $ git checkout -b myinstall origin Note: for more information about Git, please see the Koha Git Usage Guide: - http://wiki.koha.org/doku.php?id=en:development:git_usage + http://wiki.koha-community.org/wiki/Version_Control_Using_Git 1.4.2 Option B: Download Koha from http://download.koha-community.org - $ wget http://download.koha-community.org/koha-3.00.00-beta.tar.gz - ( Note: use the latest stable version) +Find the latest Koha stable version on http://download.koha-community.org +and get it: + + $ wget found on download.koha-community.org 1.5 Install additional Debian dependencies IMPORTANT: You should only use CPAN for Perl dependencies which are NOT available from the package maintainer. You have been warned! -Using the debian.packages file included in the Koha source tree, -run the following: - - $ sudo dpkg --set-selections < install_misc/debian.packages - -Now start dselect: +Run shell script installing all necessary Debian packages, MySQL Server, +Zebra and all Debian packaged Perl module required by Koha: - $ sudo dselect + $ sudo install_misc/apt-get-debian-lenny.sh -Choose [I]nstall and accept packages to be installed (hit return) - -(may take a while) - -Choose [C]onfigure, [R]emove and [Q]uit until dselect has completed. - -1.6 Install Perl dependencies that aren't packaged into Debian Etch +1.6 Install Perl dependencies that aren't packaged into Debian Lenny sources Run the following command: - $ sudo cpan MARC::Record Class::Accessor MARC::Charset MARC::File::XML \ - Net::Z3950::ZOOM HTML::Template::Pro MARC::Crosswalk::DublinCore \ - PDF::Reuse PDF::Reuse::Barcode Data::ICal GD::Barcode::UPCE \ - XML::RSS Algorithm::CheckDigits::M43_001 Biblio::EndnoteStyle POE \ - Schedule::At DBD::SQLite GD SMS::Send HTTP::OAI IPC::Cmd Locale::Currency::Format - - - WARNINGS: - 1.6.1 A Perl library Koha depends on, MARC::File::XML may not work with Perl - 5.10, see: http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=2309), - - 1.6.2 Recent versions of CGI::Session have caused some issues for users; - as of this release date, we suggest downloading the CGI::Session::Serialize::yaml - tarball direct from CPAN and install it directly rather than using the cpan command - - 1.6.3 There is a known but benign error in the test case for Barcode::Code128, - which is required by PDF::Reuse::Barcode. If this module is not installed, - you can do a forced installation of Barcode::Code128. + $ sudo cpan Algorithm::CheckDigits SMS::Send HTTP::OAI IPC::Cmd \\ + Memoize::Memcached PDF::API2::Simple PDF::Table Storable Test::More \\ + Locale::Currency::Format Note: you may need to run CPAN initialization if you've not run cpan before: @@ -159,7 +107,7 @@ When the configuration is completed CPAN will install the Perl modules. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 22 - Server version: 5.0.32-Debian_7etch3-log Debian etch distribution + Server version: 5.0.51a-24 (Debian) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. @@ -173,7 +121,9 @@ When the configuration is completed CPAN will install the Perl modules. 2.3 Test your SAX Parser and correct where necessary - You must be sure you're using the XML::LibXML SAX parser, not Expat or PurePerl, both of which have outstanding bugs with pre-composed characters. You can test your SAX parser by running: +You must be sure you're using the XML::LibXML SAX parser, not Expat or +PurePerl, both of which have outstanding bugs with pre-composed characters. +You can test your SAX parser by running: $ cd koha $ misc/sax_parser_print.pl @@ -187,80 +137,6 @@ When the configuration is completed CPAN will install the Perl modules. /etc/perl/XML/SAX/ParserDetails.ini -2.4 Install DBD::mysql Perl module - -In order to handle UTF-8 correctly, Koha requires at least version 4.004 -of the DBD::mysql Perl module. However, Debian Etch has a stable package -only for version 3.0008, so it is necessary to install the module from CPAN. -DBD::mysql's test suite needs to use a MySQL 'test' DB which doesn't exist -anymore. So there are two options to install DBD::mysql: - - (1) install without test suite, - (2) install with test suite requiring a test MySQL DB creation. - -2.4.1 Install without test suite - -Force install DBD::mysql: - - $ sudo cpan - cpan> force install DBD::mysql - -2.4.2 Create test database in order to install DBD::mysql - -Because of DBD::mysql's test suite, it is necessary to temporarily create a -test database and user: - - $ mysql -uroot -p - - Create the database and user with associated privileges: - - Welcome to the MySQL monitor. Commands end with ; or \g. - Your MySQL connection id is 22 - Server version: 5.0.32-Debian_7etch3-log Debian etch distribution - - Type 'help;' or '\h' for help. Type '\c' to clear the buffer. - - mysql> create database test; - Query OK, 1 row affected (0.00 sec) - - mysql> grant all on test.* to 'test'@'localhost' identified by 'test'; - Query OK, 0 rows affected (0.00 sec) - (test database, user, and password can be different if need be) - - mysql> flush privileges; - Query OK, 0 rows affected (0.00 sec) - - mysql> quit - -Next install DBD::mysql: - - $ sudo cpan - - cpan> o conf makepl_arg - (get current value of this CPAN parameter) - - cpan> o conf makepl_arg "--testdb=test --testuser=test --testpass=test" - - cpan> install DBD::mysql - - cpan> o conf makepl_arg '' - - OR - - cpan> o conf makepl_arg '' - - (restore this setting so as to not interfere with future CPAN installs). - - -Finally, remove the test database: - - $ mysql -uroot -p - - mysql> drop database test; - Query OK, 1 row affected (0.00 sec) - - mysql> exit - Bye 3. Run the Koha installer @@ -268,7 +144,7 @@ Finally, remove the test database: ( answer questions ) $ make $ make test - $ sudo make install #If doing a -dev install, skip the sudo! + $ sudo make install 4. Configure and start Apache $ sudo ln -s /etc/koha/koha-httpd.conf /etc/apache2/sites-available/koha @@ -280,10 +156,6 @@ Add the following lines to /etc/apache2/ports.conf: Listen 80 Listen 8080 -(Note: It may be productive to use different DNS entries and NamedVirtualHosts -directives in Apache to separate the staff and OPAC clients, to eliminate a -cross-client authentication nuisance, but it will work fine like this.) - Run the following commands: $ sudo a2enmod rewrite @@ -299,14 +171,14 @@ virtual hosts for full instructions. Note: it's recommended that you daemonize the Zebra process and add it to your startup profile. For a non-production test/development installation, running -Zebra from the command line can be useful. Otherwise you will want zebrasrv -running when Apache/Koha is. +Zebra from the command line can be useful. Pick from the two available options +below, or roll your own :-) Note: it's also recommended that you create a Koha system user, which you will have specified during the install process. Alternatively, Zebra can be configured to run as the root user. -Option 1: run the Zebra process from the command line: +Option 1: run the Zebra processes from the command line: 1.1 Zebra Search Server @@ -330,7 +202,7 @@ or an authority record is edited. $ sudo -u ${KOHA_USER} misc/migration_tools/rebuild_zebra -z -b -a NOTE: This script should be run as the kohauser (the default is 'koha'). -Option 2: run the Zebra process as a daemon, and add to startup process: +Option 2: run automatically Zebra process as a daemon: Note that references to $SCRIPT_DIR refer to the directory where Koha's command-line scripts are installed, e.g., /usr/share/koha/bin. @@ -370,31 +242,15 @@ NOTE: This job should be setup under the kohauser (the default is 'koha'). $ export KOHA_CONF=/usr/share/koha/etc/koha-conf.xml (note: use the correct path to your koha-conf.xml) -7.0 Schedule crontab jobs - Do you want Koha to: - send mail? - automatically index added records? - generate overdue or advance notices? - mark items lost after they are long overdue? - assess fines? +7.1 Import: - All these and other regularly scheduled background tasks are handled by crontab. - You need to examine the example crontab file, edit a copy to your liking, and schedule it. +Bibliographic data in MARC21 format - $ crontab -l # just check if you have any other jobs already scheduled - $ cp ./misc/cronjobs/crontab.example my_crontab - $ vi my_crontab # select jobs or adjust times. - $ # If you had already scheduled lines, add them at the bottom. - $ crontab my_crontab # This overwrites your scheduled jobs with the new ones. + $ misc/migration_tools/bulkmarcimport.pl -file /path/to/marc.iso2709 - If you want to check to confirm, you can run crontab -l again. - NOTE: Be sure to add KOHA_CONF and PERL5LIB vars to the top of your cron jobs. +Authority data in MARC21 format -7.1 Import: - Bibliographic data in MARC21 format - $ misc/migration_tools/bulkmarcimport.pl -file /path/to/marc.iso2709 - Authority data in MARC21 format - $ misc/migration_tools/bulkauthimport.pl -file /path/to/auth.iso2709 + $ misc/migration_tools/bulkmarcimport.pl -a -file /path/to/auth.iso2709 7.2 Fast Index: $ misc/migration_tools/rebuild_zebra.pl -b -w @@ -445,11 +301,7 @@ Uninstall Instructions Tested on the following operating environments ============================================== -- Debian Etch 4.0 - -Installer Bug reports -===================== -Please send any installer bug reports to jmf AT liblime DOT com +- Debian Lenny 5.0 Other Notes ===================== @@ -463,6 +315,6 @@ version. Koha is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -You should have received a copy of the GNU General Public License along -with Koha; if not, write to the Free Software Foundation, Inc., -51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +You should have received a copy of the GNU General Public License along with +Koha; if not, write to the Free Software Foundation, Inc., 59 Temple Place, +Suite 330, Boston, MA 02111-1307 USA diff --git a/INSTALL.debian-lenny b/INSTALL.debian-lenny deleted file mode 100644 index e90942b833..0000000000 --- a/INSTALL.debian-lenny +++ /dev/null @@ -1,320 +0,0 @@ -============================= -Installation Guide for Installing Koha on Debian Lenny with MySQL 5 -============================= - -Some parts copyright 2010 Chris Nighswonger - -Feedback/bug reports: Koha Developer's List: -http://lists.koha-community.org/cgi-bin/mailman/listinfo/koha-devel - -This document last modified: 19 May 2010 - -Installation Instructions -============================= - -All commands can be performed as a system user with sudo privileges, -as indicated or by running the command directly as root. - -1. Prepare System and Install Dependencies - -1.1 Install Debian Lenny via Businesscard CD - -See http://www.debian.org/releases/lenny/debian-installer/ - -1.3 Set up Indexdata apt sources for Yaz and Zebra packages - -Edit your /etc/apt/sources.list file and add the following: - - # Index Data - deb http://ftp.indexdata.dk/debian lenny main - deb-src http://ftp.indexdata.dk/debian lenny main - -The Index Data packages are signed with a key you can install as follows: - - $ wget http://ftp.indexdata.dk/debian/indexdata.asc - $ sudo apt-key add indexdata.asc - -1.4 Get Koha - -1.4.1 Option A: Download Koha via Git (optional) - - $ sudo apt-get install git-core git-email - $ git clone git://git.koha-community.org/pub/scm/koha.git kohaclone - $ cd kohaclone - $ git checkout -b myinstall origin - -Note: for more information about Git, please see the Koha Git Usage Guide: - - http://wiki.koha-community.org/wiki/Version_Control_Using_Git - -1.4.2 Option B: Download Koha from http://download.koha-community.org - -Find the latest Koha stable version on http://download.koha-community.org -and get it: - - $ wget found on download.koha-community.org - -1.5 Install additional Debian dependencies - -IMPORTANT: You should only use CPAN for Perl dependencies which are NOT - available from the package maintainer. You have been warned! - -Run shell script installing all necessary Debian packages, MySQL Server, -Zebra and all Debian packaged Perl module required by Koha: - - $ sudo install_misc/apt-get-debian-lenny.sh - -1.6 Install Perl dependencies that aren't packaged into Debian Lenny -sources - -Run the following command: - - $ sudo cpan Algorithm::CheckDigits SMS::Send HTTP::OAI IPC::Cmd \\ - Memoize::Memcached PDF::API2::Simple PDF::Table Storable Test::More \\ - Locale::Currency::Format - -Note: you may need to run CPAN initialization if you've not run cpan -before: - - /etc/perl/CPAN/Config.pm initialized. - - CPAN is the world-wide archive of perl resources. It consists of about - 100 sites that all replicate the same contents all around the globe. - Many countries have at least one CPAN site already. The resources - found on CPAN are easily accessible with the CPAN.pm module. If you - want to use CPAN.pm, you have to configure it properly. - - If you do not want to enter a dialog now, you can answer 'no' to this - question and I'll try to autoconfigure. (Note: you can revisit this - dialog anytime later by typing 'o conf init' at the cpan prompt.) - - Are you ready for manual configuration? [yes] - -When the configuration is completed CPAN will install the Perl modules. - -2. Configuration of dependencies - -2.1 Update root MySQL password (if dselect didn't do it for you already) - - $ sudo mysqladmin password - -2.2 Create the Koha database - - Create the database and user with associated privileges: - - $ mysqladmin -uroot -p create - $ mysql -uroot -p - - Welcome to the MySQL monitor. Commands end with ; or \g. - Your MySQL connection id is 22 - Server version: 5.0.51a-24 (Debian) - - Type 'help;' or '\h' for help. Type '\c' to clear the buffer. - - mysql> grant all on .* to ''@'localhost' identified by ''; - Query OK, 0 rows affected (0.00 sec) - - mysql> flush privileges; - Query OK, 0 rows affected (0.00 sec) - - mysql> quit - -2.3 Test your SAX Parser and correct where necessary - -You must be sure you're using the XML::LibXML SAX parser, not Expat or -PurePerl, both of which have outstanding bugs with pre-composed characters. -You can test your SAX parser by running: - - $ cd koha - $ misc/sax_parser_print.pl - - You should see something like:: - - XML::LibXML::SAX::Parser=HASH(0x81fe220) - - If you're using PurePerl or Expat, you'll need to edit your - ini file, typically located at: - - /etc/perl/XML/SAX/ParserDetails.ini - - -3. Run the Koha installer - - $ perl Makefile.PL - ( answer questions ) - $ make - $ make test - $ sudo make install - -4. Configure and start Apache - $ sudo ln -s /etc/koha/koha-httpd.conf /etc/apache2/sites-available/koha - (note that the path to koha-httpd.conf may be different depending on your - installation choices) - -Add the following lines to /etc/apache2/ports.conf: - - Listen 80 - Listen 8080 - -Run the following commands: - - $ sudo a2enmod rewrite - $ sudo a2ensite koha - $ sudo apache2ctl restart - -Note: you may still see the usual Apache default site if your VirtualHost -configuration isn't correct. The command "sudo a2dissite default" may be a -quick fix, but may have side-effects. See the Apache HTTPD manual section on -virtual hosts for full instructions. - -5. Configure and start Zebra - -Note: it's recommended that you daemonize the Zebra process and add it to your -startup profile. For a non-production test/development installation, running -Zebra from the command line can be useful. Pick from the two available options -below, or roll your own :-) - -Note: it's also recommended that you create a Koha system user, which you will -have specified during the install process. Alternatively, Zebra can be -configured to run as the root user. - -Option 1: run the Zebra processes from the command line: - -1.1 Zebra Search Server - -This process send responses to search requests sent by Koha or -Z39.50/SRU/SRW clients. - - $ sudo -u ${KOHA_USER} zebrasrv -f /etc/koha/koha-conf.xml - (note that the path to koha-conf.xml may be different depending on your - installation choices) - -Note: the user you run Zebra as will be the only user with write permission - on the Zebra index; in development mode, you may wish to use your - system user. - -1.2 Zebra Indexer - -Added/updated/deleted records in Koha MySQL database must be indexed -into Zebra. A specific script must be launched each time a bibliographic -or an authority record is edited. - - $ sudo -u ${KOHA_USER} misc/migration_tools/rebuild_zebra -z -b -a - NOTE: This script should be run as the kohauser (the default is 'koha'). - -Option 2: run automatically Zebra process as a daemon: - -Note that references to $SCRIPT_DIR refer to the directory where -Koha's command-line scripts are installed, e.g., /usr/share/koha/bin. - -1.1 Zebra Search Server - - $ sudo ln -s ${SCRIPT_DIR}/koha-zebra-ctl.sh /etc/init.d/koha-zebra-daemon - (Note: ${SCRIPT_DIR} is /usr/share/koha/bin/ by default in a standard install) - $ sudo update-rc.d koha-zebra-daemon defaults - ( Note: see man chkconfig(8) on other distros ) - - $ sudo ${SCRIPT_DIR}/koha-zebra-ctl.sh start - -1.2 Zebra Indexer - -Add an entry in Koha user crontab to scheduled added/updated/deleted records -indexing by Zebra with this command: - - /misc/migration_tools/rebuild_zebra -z -b -a - -See check misc/cronjobs/crontab.example for usage examples. -NOTE: This job should be setup under the kohauser (the default is 'koha'). - -6. Run the Web Installer, populate the database, initial configuration of settings - - Point your browser to http://:8080/ - - It should redirect you to the Web Installer where you can continue the setup. - You can install the sample data for libraries, patrons, etc. via the Web Installer - -7. What next? - - Once the installer has completed, you can import and index MARC records from the - command line thusly (Note: you can also use the 'Stage MARC records for import' from - the Tools area of Koha's Staff Client to import a batch of MARC records): - - $ export KOHA_CONF=/usr/share/koha/etc/koha-conf.xml - (note: use the correct path to your koha-conf.xml) - -7.1 Import: - -Bibliographic data in MARC21 format - - $ misc/migration_tools/bulkmarcimport.pl -file /path/to/marc.iso2709 - -Authority data in MARC21 format - - $ misc/migration_tools/bulkmarcimport.pl -a -file /path/to/auth.iso2709 - -7.2 Fast Index: - $ misc/migration_tools/rebuild_zebra.pl -b -w - - Once the indexing has completed, you will be able to search for records in your system. - NOTE: This script should be run as the kohauser (the default is 'koha'). - -7.3 Schedule regular index updates - You need to run rebuild_zebra.pl -b -a -z as a regular cron job in orde to pick up new bibs - and items as you add them. Check misc/cronjobs/crontab.example for usage examples. See 7.0 above. - NOTE: This job should be setup under the kohauser (the default is 'koha'). - -7.4 To enable public Z39.50/SRU servers, you'll need to edit your koha-conf.xml and - change the options to listen on a TCP port; then restart the zebra daemon. - -UPGRADE -======= -If you are upgrading from a previous installation of Koha 3, you can -use the following: - - perl Makefile.PL --prev-install-log /path/to/koha-install-log - make - make test - sudo make upgrade - -Uninstall Instructions -============================= -1) Stop Services: - $ sudo a2dissite koha - $ sudo rm /etc/apache2/sites-available/koha - $ sudo apache2ctl restart - - $ sudo update-rc.d koha-zebra-daemon remove - $ sudo rm /etc/init.d/koha-zebra-daemon - -2) Remove Database and Indexes - - # MySQL - $ mysql -u -p - > drop database koha; - - # Zebra Indexes - $ zebraidx -c /etc/zebradb/zebra-biblios.cfg -g iso2709 -d biblios init - $ zebraidx -c /etc/zebradb/zebra-authorities.cfg -g iso2709 -d authorities init - -3) Remove Koha Install Directories and Configuration Files - Don't forget about any crontab entries - -Tested on the following operating environments -============================================== -- Debian Lenny 5.0 - -Other Notes -===================== -This file is part of Koha - -Koha is free software; you can redistribute it and/or modify it under the -terms of the GNU General Public License as published by the Free Software -Foundation; either version 2 of the License, or (at your option) any later -version. - -Koha is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR -A PARTICULAR PURPOSE. See the GNU General Public License for more details. -You should have received a copy of the GNU General Public License along with -Koha; if not, write to the Free Software Foundation, Inc., 59 Temple Place, -Suite 330, Boston, MA 02111-1307 USA