#!/usr/bin/perl
use strict;
+# use warnings; # FIXME
use CGI;
-use C4::Labels;
+use C4::Labels; # GetActiveLabelTemplate get_label_options GetAssociatedProfile
+# GetPatronCardItems GetLabelItems GetUnitsValue...
use C4::Auth;
use C4::Output;
use C4::Context;
use HTML::Template::Pro;
use PDF::Reuse;
use PDF::Reuse::Barcode;
-use POSIX;
+use POSIX; # ceil
use Data::Dumper;
my $DEBUG = 0;
my $DEBUG_LPT = 0;
-my $htdocs_path = C4::Context->config('intrahtdocs');
my $cgi = new CGI;
-print $cgi->header( -type => 'application/pdf', -attachment => 'barcode.pdf' );
-
-my $spine_text = "";
+#### Tons of Initialization ####
# get the printing settings
my $template = GetActiveLabelTemplate();
-my $conf_data = get_label_options();
+my $conf_data = get_label_options() or die "get_label_options failed";
my $profile = GetAssociatedProfile($template->{'tmpl_id'});
my $batch_id = $cgi->param('batch_id');
my $batch_type = $conf_data->{'type'};
my $barcodetype = $conf_data->{'barcodetype'};
-my $printingtype = $conf_data->{'printingtype'};
+my $printingtype = $conf_data->{'printingtype'} or die "No printingtype in conf_data";
my $guidebox = $conf_data->{'guidebox'};
my $start_label = $conf_data->{'startlabel'};
if ($cgi->param('startlabel')) {
- $start_label = $cgi->param('startlabel'); # A bit of a hack to allow setting the starting label from the address bar... -fbcit
- }
+ $start_label = $cgi->param('startlabel'); # A bit of a hack to allow setting the starting label from the address bar... -fbcit
+}
warn "Starting on label #$start_label" if $DEBUG;
my $units = $template->{'units'};
#warn "fontsize = $fontsize";
#warn Dumper $template;
-my $unitvalue = GetUnitsValue($units);
+my $unitvalue = GetUnitsValue($units);
my $prof_unitvalue = GetUnitsValue($profile->{'unit'});
warn "Template units: $units which converts to $unitvalue PostScript Points" if $DEBUG;
my $tmpl_code = $template->{'tmpl_code'};
my $tmpl_desc = $template->{'tmpl_desc'};
-my $page_height = ( $template->{'page_height'} * $unitvalue );
-my $page_width = ( $template->{'page_width'} * $unitvalue );
+my $page_height = ( $template->{'page_height'} * $unitvalue );
+my $page_width = ( $template->{'page_width'} * $unitvalue );
my $label_height = ( $template->{'label_height'} * $unitvalue );
-my $label_width = ( $template->{'label_width'} * $unitvalue );
-my $spine_width = ( $template->{'label_width'} * $unitvalue );
-my $circ_width = ( $template->{'label_width'} * $unitvalue );
-my $top_margin = ( $template->{'topmargin'} * $unitvalue );
-my $left_margin = ( $template->{'leftmargin'} * $unitvalue );
-my $colspace = ( $template->{'colgap'} * $unitvalue );
-my $rowspace = ( $template->{'rowgap'} * $unitvalue );
+my $label_width = ( $template->{'label_width'} * $unitvalue );
+my $spine_width = ( $template->{'label_width'} * $unitvalue );
+my $circ_width = ( $template->{'label_width'} * $unitvalue );
+my $top_margin = ( $template->{'topmargin'} * $unitvalue );
+my $left_margin = ( $template->{'leftmargin'} * $unitvalue );
+my $colspace = ( $template->{'colgap'} * $unitvalue );
+my $rowspace = ( $template->{'rowgap'} * $unitvalue );
warn "Converted dimensions are:" if $DEBUG;
warn "pghth=$page_height, pgwth=$page_width, lblhth=$label_height, lblwth=$label_width, spinwth=$spine_width, circwth=$circ_width, tpmar=$top_margin, lmar=$left_margin, colsp=$colspace, rowsp=$rowspace" if $DEBUG;
my $left_text_margin = 3; # FIXME: This value should not be hardcoded
my $str;
-prInitVars();
-$| = 1;
-prFile();
-
# Some peritent notes from PDF::Reuse regarding prFont()...
# If a font wasn't found, Helvetica will be set.
# These names are always recognized: Times-Roman, Times-Bold, Times-Italic, Times-BoldItalic, Courier, Courier-Bold,
my $lowerLeftY = 0;
my $upperRightX = $page_width;
my $upperRightY = $page_height;
-
-prMbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY );
-
my $codetype; # = 'Code39';
-#do page border
-# drawbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY );
+warn "Active profile: " . ($profile->{prof_id} || "None") if $DEBUG;
+#### PRINT PRELIMINARY DATA ####
+print $cgi->header( -type => 'application/pdf', -attachment => 'barcode.pdf' );
+ # Don't print header until very last possible moment
+ # That way if error or die occurs, fatals_to_browser will still work.
+ # After we print this header, there is no way back to HTML. All we can do is deliver PDF.
+prInitVars();
+$| = 1;
+prFile(); # No args means to STDOUT
+prMbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY );
+
+# drawbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY ); #do page border
# draw margin box for alignment page
-drawbox( ($left_margin), ($top_margin), ($page_width-(2*$left_margin)), ($page_height-(2*$top_margin)) ) if $DEBUG_LPT;
+drawbox($left_margin, $top_margin, $page_width-(2*$left_margin), $page_height-(2*$top_margin)) if $DEBUG_LPT;
+
+#### TWEAKS and DEBUGGING ###
# Adjustments for image position and creep -fbcit
# NOTE: *All* of these factor in to image position and creep. Keep this in mind when makeing adjustments.
# Suggested proceedure: Adjust margins until both top and left margins are correct. Then adjust the label
# height and width to correct label creep across and down page. Units are PostScript Points (72 per inch).
-warn "Active profile: " . ($profile->{'prof_id'}?$profile->{'prof_id'}:"None") if $DEBUG;
-
-if ( $DEBUG ) {
- warn "-------------------------INITIAL VALUES-----------------------------";
- warn "top margin = $top_margin points\n";
- warn "left margin = $left_margin points\n";
- warn "label height = $label_height points\n";
- warn "label width = $label_width points\n";
+sub debug_drop {
+ my $title = @_ || "";
+ warn "-------------------------$title-----------------------------\n"
+ . " top margin = $top_margin points\n"
+ . " left margin = $left_margin points\n"
+ . "label height = $label_height points\n"
+ . "label width = $label_width points\n";
}
+debug_drop('INITIAL VALUES') if ($DEBUG);
+
if ( $profile->{'prof_id'} ) {
- $top_margin = $top_margin + ($profile->{'offset_vert'} * $prof_unitvalue); # controls vertical offset
- $label_height = $label_height + ($profile->{'creep_vert'} * $prof_unitvalue); # controls vertical creep
- $left_margin = $left_margin + ($profile->{'offset_horz'} * $prof_unitvalue); # controls horizontal offset
- $label_width = $label_width + ($profile->{'creep_horz'} * $prof_unitvalue); # controls horizontal creep
+ $top_margin += ($profile->{'offset_vert'} * $prof_unitvalue); # controls vertical offset
+ $label_height += ($profile->{'creep_vert'} * $prof_unitvalue); # controls vertical creep
+ $left_margin += ($profile->{'offset_horz'} * $prof_unitvalue); # controls horizontal offset
+ $label_width += ($profile->{'creep_horz'} * $prof_unitvalue); # controls horizontal creep
}
-if ( $DEBUG && $profile->{'prof_id'} ) {
- warn "-------------------------ADJUSTED VALUES-----------------------------";
- warn "top margin = $top_margin points\n";
- warn "left margin = $left_margin points\n";
- warn "label height = $label_height points\n";
- warn "label width = $label_width points\n";
-} elsif ( $DEBUG ) {
- warn "No profile associated so no adjustment applied.";
+if ($DEBUG) {
+ if ($profile->{'prof_id'}) {
+ debug_drop('ADJUSTED VALUES');
+ } else {
+ warn "No profile associated so no adjustment applied.";
+ }
}
-my $item;
-my ( $i, $i2 ); # loop counters
-
#warn " $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY";
#warn "$label_rows, $label_cols\n";
#warn "$label_height, $label_width\n";
#warn "$page_height, $page_width\n";
-my ( $rowcount, $colcount, $x_pos, $y_pos, $rowtemp, $coltemp );
+my ($item, $rowcount, $colcount, $x_pos, $y_pos, $rowtemp, $coltemp);
-if ( $start_label eq 1 ) {
+if ( $start_label and $start_label == 1 ) {
$rowcount = 1;
$colcount = 1;
$x_pos = $left_margin;
$y_pos = ( $page_height - $top_margin - $label_height );
-}
-
-else {
+} else {
$rowcount = ceil( $start_label / $label_cols );
$colcount = ( $start_label - ( ( $rowcount - 1 ) * $label_cols ) );
$x_pos = $left_margin + ( $label_width * ( $colcount - 1 ) ) +
( $colspace * ( $colcount - 1 ) );
$y_pos = $page_height - $top_margin - ( $label_height * $rowcount ) -
( $rowspace * ( $rowcount - 1 ) );
- warn "Start label specified: $start_label Beginning in row $rowcount, column $colcount" if $DEBUG;
- warn "X position = $x_pos Y position = $y_pos" if $DEBUG;
- warn "Rowspace = $rowspace Label height = $label_height" if $DEBUG;
+ $DEBUG and warn "Start label: $start_label. Beginning in row $rowcount, column $colcount\n"
+ . "(X,Y) positions = ($x_pos,$y_pos)\n"
+ . "Rowspace = $rowspace, Label height = $label_height";
}
#
-# main foreach loop
+#### main foreach loop ####
#
foreach $item (@resultsloop) {
warn "Label parameters: xpos=$x_pos, ypos=$y_pos, lblwid=$label_width, lblhig=$label_height" if $DEBUG;
+
+ drawbox($x_pos, $y_pos, $label_width, $label_height) if $guidebox; # regardless of printingtype
+
if ( $printingtype eq 'BAR' ) {
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
- DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'},
- $barcodetype );
- CalcNextLabelPos();
+ DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'}, $barcodetype );
}
elsif ( $printingtype eq 'BARBIB' ) {
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
-
# reposoitioning barcode up the top of label
my $barcode_height = ($label_height / 1.5 ); ## scaling voodoo
my $text_height = $label_height / 2;
my $barcode_y = $y_pos + ( $label_height / 2.5 ); ## scaling voodoo
- DrawBarcode( $x_pos, $barcode_y, $barcode_height, $label_width,
- $item->{'barcode'}, $barcodetype );
+ DrawBarcode( $x_pos, $barcode_y, $barcode_height, $label_width, $item->{'barcode'}, $barcodetype );
DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
$left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
-
- CalcNextLabelPos();
-
} # correct
elsif ( $printingtype eq 'BIBBAR' ) {
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
my $barcode_height = $label_height / 2;
- DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $item->{'barcode'},
- $barcodetype );
+ DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $item->{'barcode'}, $barcodetype );
DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
$left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
-
- CalcNextLabelPos();
}
-
elsif ( $printingtype eq 'ALT' ) {
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
- DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'},
- $barcodetype );
+ DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'}, $barcodetype );
CalcNextLabelPos();
drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
$left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
-
- CalcNextLabelPos();
}
-
-
elsif ( $printingtype eq 'BIB' ) {
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
$left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
- CalcNextLabelPos();
}
-
elsif ( $printingtype eq 'PATCRD' ) {
my $patron_data = $item;
-
#FIXME: This needs to be paramatized and passed in from the user...
#Each element of this hash is a separate line on the patron card. Keys are the text to print and the associated data is the point size.
my $text = {
$patron_data->{'description'} => $fontsize,
$patron_data->{'branchname'} => ($fontsize + 3),
};
-
$DEBUG and warn "Generating patron card for cardnumber $patron_data->{'cardnumber'}";
-
- drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
my $barcode_height = $label_height / 2.75; #FIXME: Scaling barcode height; this needs to be a user parameter.
- DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $patron_data->{'cardnumber'},
- $barcodetype );
+ DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $patron_data->{'cardnumber'}, $barcodetype );
DrawPatronCardText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
$left_text_margin, $text_wrap_cols, $text, $printingtype );
- CalcNextLabelPos();
}
+ else {
+ die "CANNOT PRINT: Unknown printingtype '$printingtype'";
+ }
+
+ CalcNextLabelPos(); # regardless of printingtype
} # end for item loop
prEnd();
sub CalcNextLabelPos {
- if ( $colcount lt $label_cols ) {
-
- # warn "new col";
+ if ($colcount < $label_cols) {
+ # warn "new col";
$x_pos = ( $x_pos + $label_width + $colspace );
$colcount++;
- }
-
- else {
+ } else {
$x_pos = $left_margin;
- if ( $rowcount eq $label_rows ) {
-
- # warn "new page";
+ if ($rowcount == $label_rows) {
+ # warn "new page";
prPage();
$y_pos = ( $page_height - $top_margin - $label_height );
$rowcount = 1;
- }
- else {
-
- # warn "new row";
+ } else {
+ # warn "new row";
$y_pos = ( $y_pos - $rowspace - $label_height );
$rowcount++;
}